
Firmware version
04.05.0010
500 ₽
Delivery type
Electronic delivery
Master's visit for firmware upgrade only in Moscow.
The visit of the master in the Moscow region is coordinated with the manager.
The visit of the master in the Moscow region is coordinated with the manager.
500 ₽
Original service firmware version 04.05.0010 for Kyocera ECOSYS M2030dn and M2035dn MFP's.
You can update the MFP yourself by following the instructions or you can call an engineer to your place to update the firmware, or you can bring the device to our service center, we will update the firmware of your device on the spot.
!Attention. The firmware is supplied electronically, the USB flash drive is not included. When the engineer leaves for the firmware, our specialist arrives with his prepared flash drive for the firmware of your device.
Firmware information
Service bulletin: SB-2PM-0009-G124
Modifications | Description |
---|---|
FW version | 04.05.0010 (13.07.2016) |
Release date | 28.07.2016 |
Support for the auto DP original size detection | The function is added to enable the DP to automatically judge the original size from the sub scanning length of the original without the instruction of the original size by users |
Support for the proxy settings for the Google Cloud Print 2.0 | |
Support for New Card Reader | New Card Reader (HID OMNIKEY 5427) is supported |
Corrective measures for the print shifting with IBM-5577 | The print position might shift when the panel emulation is IBM-5577 |
Support for the immediate update when selecting "Kanji Font" from the panel | "Kanji Font" (2-bite characters) setting from the panel might not be updated immediately |
Corrective measures for the output failure | In case of opening the property of the target machine by KNV, the counter value might remain retrieving and might not be displayed |
Corrective measures for F245 | F245 might occur |
Corrective measures for the error at Scan to SMB | In case of setting the 'security = share' at the security setting of SAMBA 3.6.3 with Linux (Ubuntu), sending error 1102 might appear at the Scan to SMB |
Corrective measures for the print failure with the certain file | The underline might be printed above the letters when printing the certain file |
Corrective measures for inability of Hebrew character prin | Hebrew character might not be printed |
Corrective measures for the output failure | Unexpected font might be output with the certain file |
Corrective measures for the failure with a user data containing the macro definition | A user data with the macro definition might not be overlay printed |
Improving the output performance from AS400 | Output of the macro data from AS400 via prescribe is quickened |
Corrective measures for the lock-up when using MyQ | The main unit might lock up when using MyQ under the certain user environment |
Corrective measures for inability of Scan to SMB under the certain environment | Scan to SMB might be unavailable when sending the scan data to Windows Server 2008R2 Enterprise via NTLMv2 |
Improving the Scan to SMB performance | Scan to SMB for Windows7 is quickened |
Corrective measures for the machine lock-up when setting the Google Cloud Print | The main unit might lock up when Google Cloud Print is set and also the port for that setting is closed |
Corrective measures for the inability of "Start" key | "Start" key might not be operated (might not be able to be pushed) when copying spread-page originals |
Corrective measures for the FAX sending failure from the HyPAS application | Only the first job might fail when sending FAX using the HyPAS application 'FAX Hub' while the main unit has any error such as paper empty, cover open, etc |
Corrective measures for the overlapped indication of the LDAP external address book | The searching result of the LDAP external address book might be overlapped 3 times |
Corrective measures for the ID card reader recognition failure | The ID card reader might not be recognized |
Changing the error code when reaching the size limitation of the destination folder | The sending error code when reaching the size limitation of the destination folder is changed from "720F" to "1103" in order to reduce the call from users. Instruction about 720F in Operation Guide: - Turn the main power switch off and back on. If this error occurs several times, make a note of the displayed error code and contact your service representative Instruction about 1103 in Operation Guide: - Check the SMB settings - Check the FTP settings |
Corrective measures for the lock-up when recovering from the sleep mode | The main unit might lock up when recovering from the sleep mode |
Corrective measures for F010 | F010 might appear due to the improper error log storage when KERNEL PANIC occurs. Therefore, the error log of the KERNEL PANIC is not stored from now on |
Correcting U917 [Read/Write Backup HDD Data (USB)] | In case of reading and writing the date which is registered in the program by using U917 [Read/Write Backup HDD Data (USB)], 'Paper size' and 'Media type' are written with initialized condition |
Corrective measures for the font printing failure | The font pitch might be improper or the font might be rotated on the image when printing the data using PC-PR201 |
Corrective measures for the file attachment failure with the event report | The file might not be attached to the event report sent by email |
Corrective measure for the failure of the maintenance mail | The text file might not be attached to the maintenance mail. Or, the send error 0x800a might appear when sending |
Corrective measures for the counter value indication error with KNV | The counter value might remain the state that is trying to be acquired when opening the printer property of the target main unit using KNV, and it might not be displayed |
Corrective measures for F24B | F24B or F000 might appear when printing a large amount of pages. Change: When printing a large amount of pages, unauthorized access occurs as deleting the font cash does not process properly; therefore, change is made to process deleting properly |
Corrective measure for the print failure of the certain file (PCL5) | Print failure might occur with the certain file (PCL5). (The font size might become big and protrude from the cell frame) |
Improving the output performance | Outputting in the certain environment is quickened |
Improving the performance of the certain PS data | Printing of the certain PS data is quickened |
Corrective measures for the output failure with the certain data | A part of fonts might overlap on the image when printing the certain data |
Corrective measures for the failure with the certain PS data | The unexpected result might be output with the certain PS data |
Corrective measures for print shifting with the certain file | The print position might shift or letters might overlap with the certain file |
Corrective measures for the inability of proper printing with the certain data | Printing might not be properly executed with the certain data. (By the case, printing might not be executed and F248 might appear) |
Correcting printing from MAC OS through a USB cable | Characters might be garbled when printing through a USB cable after installing the driver by the MAC OS (El Capitan) |
Corrective measures for the inability of printing from MAC | Depending on the user environment, printing might be unavailable from Mac |
Corrective measures for the failure when setting the language to French in the Command Center | The setting of Address Book might be unavailable when setting the language to French in the Command Center. (There is no reflection even if clicking any tabs) |
Corrective measures for F24B when sending the certain PCL data | F24B might appear when sending the certain PCL data while setting the B/W mode |
Corrective measures for printing failure with the certain PCL data | Numbers might not be partly printed when outputting the certain PCL data |
Corrective measures for the character drop-out | The characters might drop out when outputting a file from the main system |
Improving output performance with the certain PDF file | Outputting the certain PDF data is quickened |
Corrective measures for the font size fluctuation with the certain data | The font size might be partly fluctuated when printing the certain data |
Corrective measures for the inability of the OCR-B font printing | A part of fonts (OCR-B Font) might not be printed with the certain data |
Note: This is a released version P7/2016
FW section | Version |
---|---|
Main | 2PK_2000.004.016 (NEW) |
Engine (30ppm) | 2PK_1000.005.001 |
Engine (35ppm) | 2PK_1000.005.001 |
Language BR | 2PK_81BR.001.021 (NEW) |
Scan | 2PM_1200.001.008 |
Firmware
Delivery type
Electronic deliveryFile type
ZIP archiveFile size
148~155 MB, depending on firmware versionDimensions and weight in packaging
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.
Similar products