
Firmware version
02.03.0010
500 ₽
Delivery type
Electronic delivery
Master's visit for firmware upgrade only in Moscow.
The visit of the master in the Moscow region is coordinated with the manager.
The visit of the master in the Moscow region is coordinated with the manager.
500 ₽
Original service firmware version 02.03.0010 for Kyocera ECOSYS M2030dn and M2035dn MFP's.
You can update the MFP yourself by following the instructions or you can call an engineer to your place to update the firmware, or you can bring the device to our service center, we will update the firmware of your device on the spot.
!Attention. The firmware is supplied electronically, the USB flash drive is not included. When the engineer leaves for the firmware, our specialist arrives with his prepared flash drive for the firmware of your device.
Firmware information
Service bulletin: SB-2PM-0003-E138
Modifications | Description |
---|---|
FW version | 02.03.0010 (25.08.2014) |
Release date | 15.09.2014 |
New support of the TDRS (TD Remote Services) V1.1 | The change was made in order to newly support the TDRS |
Release of the new maintenance mode U977 (Data capture mode) | U977 (Data capture mode) was newly added to the maintenance mode |
Correction of the function to acquire total counter with a certain system | When acquiring the total counter value of the main unit with a certain system, the counter value could not be correctly acquired and displayed as 0. Therefore, this was corrected |
Performance improvement with a certain type of file | The PDF direct print of a certain type of file took long. Therefore, this was corrected |
Measures against the deformation of the corners of a box (square) formed by Prescribe | The corners of the box (square) formed by the Prescribe might be deformed and the upper and lower (left and right) sides might join. Therefore, this was corrected |
Performance improvement of PCL and KPDL | The performance between PCL (GDI mode) and KPDL (GDI mode) was extremely different. Therefore, this was corrected |
Measures against FAX transmission error | FAX could not be transmitted when the FAX driver was set up as follows while the FAX transmission was available - Local authentication: OFF - Local authentication information: Only FAX transmission is unavailable |
Measures against the garbled characters when registering a certain macro data | Characters were garbled when registering the macro data containing the comment data of PCL5c. Therefore, this was corrected |
Measures against the unexpected output when printing certain files when setting "Override A4/LTR" to ON | Unexpected image might be output when printing certain files if the setting Override A4/LTR was set to ON. Therefore, this was corrected |
Output performance improvement when printing a certain PDF file (PS data) | The output performance was improved when printing a certain PDF data (PS data) |
Output performance improvement of the certain PDF file | Compared to other models, it took longer to output a certain type of PDF file. Therefore, this was corrected |
Measures against undesired black line printing | Undesired black lines may be printed when printing certain PCL data. Therefore, this was corrected |
Measures against the lock-up when printing certain PDF files | The machine might be locked when printing a certain type of PDF file. Therefore, this was corrected |
Measures against the print failure when printing the data with embedded barcode command (BARC) | Prescribe data might be printed as text when printing PCL data with embedded barcode command (BARC). Therefore, this was corrected |
Improvement of the ArchiCAD output when printing from certain Mac files | When printing a certain file from a Mac to the ArchiCAD, the printing speed was very slow. Therefore, this was corrected |
Measures against the system error F27A | The system error F27A might appear due to the failure of allocating the memory in a certain condition. (The setting values might be partly initialized.) Therefore, the mechanism of the memory allocation was changed |
Measures against the malfunction of the raster graphic command | A part of raster graphic commands might not function. Therefore, this was corrected |
Improvement of the SMB sending | The SMB sending speed was slow when scanning a certain original. Therefore, the correction was made |
Measures against the failure of "Initialize" in the U010 | Although the “Initialize” key of the maintenance mode U010 was pressed, the data was not initialized. Therefore, this was corrected |
Change of the time zone | The correction was made in order to adjust the printer to the Windows8 time zone |
Measures against the country code initialization | The country code might be initialized to 181 (default country code) when turning the main power OFF during initializing the country code Changes: 1) When executing the maintenance mode U600, U601 or setting the country code by a user, the log information containing the country code, OEM code and the execution date will be stored at the beginning of the process 2) When the firmware detects the main power OFF during the country code initialization process, the initialization of the country code will be executed by using the country code and the OEM code in the log information stored in the process described 1) above |
Note: This is a released version
FW section | Version |
---|---|
Main | 2PK_2000.002.102 (NEW) |
Engine (30ppm) | 2PK_1000.003.001 (NEW) |
Engine (35ppm) | 2PK_1000.003.001 (NEW) |
Language BR | 2PK_81BR.001.018 (NEW) |
Scan | 2PM_1200.001.008 |
Firmware
Delivery type
Electronic deliveryFile type
ZIP archiveFile size
148~155 MB, depending on firmware versionDimensions and weight in packaging
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.
Similar products