
Firmware version
03.04.0010
500 ₽
Delivery type
Electronic delivery
Master's visit for firmware upgrade only in Moscow.
The visit of the master in the Moscow region is coordinated with the manager.
The visit of the master in the Moscow region is coordinated with the manager.
500 ₽
Original service firmware version 03.04.0010 for Kyocera ECOSYS M2030dn and M2035dn MFP's.
You can update the MFP yourself by following the instructions or you can call an engineer to your place to update the firmware, or you can bring the device to our service center, we will update the firmware of your device on the spot.
!Attention. The firmware is supplied electronically, the USB flash drive is not included. When the engineer leaves for the firmware, our specialist arrives with his prepared flash drive for the firmware of your device.
Firmware information
Service bulletin: SB-2PM-0007-F171
Modifications | Description |
---|---|
FW version | 03.04.0010 (30.10.2015) |
Release date | 03.12.2015 |
TDRS 1.2 support | |
AirPrint 1.4 support | |
Net Manager PIN code authentication | |
MyPanel support | |
Google Cloud Print 2.0 support | |
TDRS Offline support | When TDRS is Offline, it recovers to Online by restarting both TDRS and the main unit to reconnect the communication. Sometimes, the main unit is not Offline when TDRS is Offline. In that case, the main unit might not restart and the connection might not recover. As a result, TDRS remains Offline Change: - The above situation might occur when the TDRS time-out is earlier than the main unit time-out. Thus, both time-outs are synchronized so that the main unit becomes Offline - When an irregular line-interruption signal is transferred to the main unit, the main unit cannot detect it as the one to interrupt the communication, and it is not switched Offline. Thus, if the main unit receives the signal, it switches to Offline with the new firmware |
Corrective measures for system error F26F (F245) while connecting TDRS | When the network communication requires much time in the main unit with TDRS, the waiting processing of the events from the main unit might become full and the system error F26F (F245) might appear Change: - When a communication is over a certain time, the later events are deleted in a short term to prevent the event stay. (Time-out mode) - When TDRS does not reply for 2 minutes, the controller directs TDRS to display "Offline" |
Corrective measures for system error F26F | When unnecessary events stay in the queue used for the IPP print due to any causes and the queue is filled, the system error F26F might appear. Thus, the unnecessary events are deleted to prevent the processing from being delayed |
Corrective measures for the data destruction inside the JFF2 | The system error might appear, or the machine lockup might occur since the data inside the JFFS2 (Journaling Flash File System Ver.2) is destroyed Change: The controller firmware is corrected so that the internal data destroyed can recover correctly |
Support for the translation in German on the Command Center | The description on the Command Center is translated in German. The applicable button is originally indicated as [Übersicht] in German, but its description was "Start" |
Corrective measures for the printing failure of the attached file | When printing e-mail data from the FAX Server, the attached file might not be printed |
Corrective measures for the recognition failure of the SSFC card using TASKGUARD | The SSFC card might not be recognized after setting the SSFC card on the setting screen of the TASKGUARD ID Printing. (The login might not be unavailable while the LED of the card reader blinks but does not react) |
GARP support | The control is corrected since the network communication might need the time excessively at the certain user's environment - The GARP is resent repeatedly 3 times. (The resending interval is 60s) - The value of the retry timeout when acquiring the IP address with DHCP is changed from 300s to 30s |
Corrective measures for the KPDL error with the certain file | The judging process of Object Type of CIDMap when outputting the certain file is incorrect. Consequently, the KPDL error might appear |
Corrective measures for the invalid settings with Quicksetup during the sleep mode | The settings from Quicksetup during the sleep mode might be invalid |
Corrective measures for the output error of the certain PS data | The unexpected output might result when printing the certain PS data |
Corrective measures for system error F246 that appears instead of the paper jam error | While the paper jam error should appear normally, system error F246 might appear instead |
MIB OID support | The following MIB OID is supported "1.3.6.1.2.1.43.11.1.1.3", // prtMarkerSuppliesColorantIndex |
Adding the menus to the Command Center for TA | The following menus are added to Web Server RX (Command Center) for TA - Link - HyPAS Applications - Network options |
Corrective measures for system error F21B during the Network Fax transmission | System error F21B might appear when the output format of the certain software is transmitted via Network Fax |
Corrective measures for the output failure with Mobile Print | When outputting from Mobile Print, the monochrome print and the zoom to fit the paper size might be unavailable Phenomena - Color print: The data might be printed with color even if selecting the monochrome mode - Paper size: While the paper of the defined size is fed and ejected, the image might be printed in the full magnification (The image might not be zoomed according to the defined paper size) |
Corrective measures for system error F248 | System error F248 might appear when printing the certain file successively |
Corrective measures for the successive blank page output | The successive blank pages might be output when printing the PS data (PDF) from the ERP System |
Corrective measures for the error when outputting the certain file | The "Typecheck" error might appear when outputting the certain file |
Corrective measures for the output failure with the certain file | The certain PS data might not be output normally, or the character pitch on the output result might be improper |
Corrective measures for the unprintable certain font in the certain file | A certain font is not printed with a certain file |
Corrective measures for system error F248 with the certain data | System error F248 might appear with the certain PDF data |
Corrective measures for the abnormal image with the certain file | The fonts might overlap on the image when printing the certain file |
Normalizing the processing of calling PS font | The processing to call the PS font when printing after registering it into the HDD might be executed normally |
Corrective measures for system error F246 | While the paper jam error should appear normally according to the certain operation, system error F246 might appear instead |
New models support | The FAX firmware is upgraded to support the new models |
Adding the application choices in System Menu | The application choices are added in System Menu to prepare them for "Application requiring the Activation" that may be supported in the future. (As of January 2016, there is no available application) |
Note: This is a released version P11/2015
FW section | Version |
---|---|
Main | 2PK_2000.003.032 (NEW) |
Engine (30ppm) | 2PK_1000.004.001 |
Engine (35ppm) | 2PK_1000.004.001 |
Language BR | 2PK_81BR.001.019 (NEW) |
Scan | 2PM_1200.001.008 |
Firmware
Delivery type
Electronic deliveryFile type
ZIP archiveFile size
148~155 MB, depending on firmware versionDimensions and weight in packaging
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.
Similar products