
Firmware version
05.05.0010
500 ₽
Delivery type
Electronic delivery
Master's visit for firmware upgrade only in Moscow.
The visit of the master in the Moscow region is coordinated with the manager.
The visit of the master in the Moscow region is coordinated with the manager.
500 ₽
Original service firmware version 05.05.0010 for Kyocera ECOSYS M2030dn and M2035dn MFP.
You can update the MFP yourself by following the instructions or you can call an engineer to your place to update the firmware, or you can bring the device to our service center, we will update the firmware of your device on the spot.
!Attention. The firmware is supplied electronically, the USB flash drive is not included. When the engineer leaves for the firmware, our specialist arrives with his prepared flash drive for the firmware of your device.
Firmware information
Service bulletin: SB-2PM-0011-G216
Modifications | Description |
---|---|
FW version | 05.05.0010 (25.10.2016) |
Release date | 30.11.2016 |
Support for KFS 1.3 | |
Corrective measures for the character rotation by 90 degrees with the certain data | The characters might be rotated by 90 degrees when outputting the certain data |
Increasing the reliability for the security | To increase the reliability for the security, correction is made |
Corrective measures for the abnormal MAC address | The obtaining result of MAC address might fail and MAC address might change to 'FF:FF:FF:FF:FF'. As a result, printing might be unavailable |
Corrective measures for the inability of the network connection | In a certain network environment, a part of the network might not be connected, or system error F25E might appear |
Corrective measures for authentication failure from the Command Center | The Anonymous authentication on the LDAP from the Command Center might fail. (No problem from the operation panel) |
Corrective measures for system error F24C | The packet processing output from the network equipment might become unstable depending on the user's environment (connecting to the certain network equipment), and system error F24C might appear |
Corrective measures for the failure with the certain file | The dotted lines might be partly drawn as solid lines when outputting the certain PS data (PDF data) |
Corrective measures for printing failure with the certain macro data | The printing failure might occur when printing the data with the certain macro according to the certain procedures |
Corrective measures for system error F55C with the certain file | System error F55C might appear with the certain file |
Corrective measures for paper feeding from the unselected cassette with the certain file | Paper might be always fed from the default cassette even if the paper size is selected to request it when outputting the certain PS data |
Corrective measures for system error F248 when outputting the certain PS data | System error F248 might appear when outputting the certain PS data |
Corrective measures for black & white image inversed output with the PCL5 data | The black and white image might be inversed with the PCL data |
Corrective measures for the failure when sending the macro data | The registered macro might not be printed when sending the macro data |
Corrective measures for unexpected page break | Page break might be done at the unexpected position unless setting the paper size when specifying the paper source for outputting the certain file |
Corrective measures for the inability of the certain font printing when directly printing the PDF file | When directly printing the PDF file specifying 'Times New Roman', the characters might not be printed with 'Times New Roman' that is resident font of the printer |
Corrective measures for the character shifting in a user's environment | The characters might shift when printing them with the XPS printer driver at a user's environment |
Corrective measures for the font outputting failure with the certain data | When sending the certain data by using a job where the certain font is stored in a SD card and the font is read to print by being inserted the SD card into the main unit, the font might not be output |
Corrective measure for system error F24B | System error F24B might appear with the certain data |
Corrective measures for the invalid bold font letters | The bold font letters specified when printing the certain PCL macro data might be invalid |
Download font 'DingbatD' support | The download font 'DingbatD' is enabled |
Corrective measures for system error F248 | System error F248 might appear when sending the data containing PRESCRIBE command by the certain setting and procedure |
Corrective measures for the duplicate print of the text | A part of texts might be duplicated when printing the certain PCL/HPGL data |
Corrective measures for not displaying the certain letter | The certain letter in the symbol set might not be displayed |
Corrective measures for not displaying the letter of the download font | The certain letter might not be displayed when using the download font under HPGL |
Corrective measure for the density change of the water mark text | When printing the multiple jobs, there might be the possibility that the density of the water mark text become partially light |
Corrective measures for the outputting failure from the certain system | The frame line might not be correctly printed when printing the data from the certain system |
Corrective measure for system error F248 with the certain data | System error F248 might appear with the certain data |
SMBv2 / SMBv3 (CIFS-NQ) support |
Note: This is a released version P11/2016
FW section | Version |
---|---|
Main | 2PK_2000.005.011 (NEW) |
Engine (30ppm) | 2PK_1000.005.001 |
Engine (35ppm) | 2PK_1000.005.001 |
Language BR | 2PK_81BR.001.023 (NEW) |
Scan | 2PM_1200.001.008 |
Firmware
Delivery type
Electronic deliveryFile type
ZIP archiveFile size
148~155 MB, depending on firmware versionDimensions and weight in packaging
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.
Similar products